Motor lock accessories

• Optical locking display
• Easy installation thanks to self-locking plug connections
• Plug&Play connection to motor, spring-loaded contacts and frame mains adapter

• High-quality brushed stainless steel cover plate
• Extremely flat, elegant design – only 3.5 mm high

• Junction box with control board incl. radio receiver and mains adapter
  • Input voltage:
    90-265 V AC
  • Output voltage:
    12 V DC/2.1 A

• Perfect for retrofitting
• Dimensions:
  (H x W x D) 200 x 112 x 84 mm

• Electronically controlled switching power supply
• Profile-specific versions
• Input: 230 V AC
• Output: 12.5 V DC
• Output current: 1.9 A at 100% DC; 3 A at 5% DC

• Resistant against short circuiting and overload thanks to fully electronic shutoff
• High security thanks to a fully moulded case
• VDE tested
• Compact design
• For all materials and profile types

• Electronically controlled switching power supply with two different outputs
• Input: 110 - 230 V AC
• Output: 12.5 V DC/1.9 A and 24 V DC/3A, Nominal voltage: 25 V DC ± 5%
• 12 V DC output for the FUHR motor locks autotronic 834/836 and multitronic 881GL

• 24 V DC output for e.g. GEZE swing door drive ECturn Inside, in combination with a connection cable 
• Resistant against short circuiting and overload thanks to fully electronic shutoff
• High security thanks to a fully moulded case
• Compact design
• With optional rounded end caps

• Takes over the 12 V DC supply once in event of a power cut to move the motor lock into a defined end position
• Input 12 V DC/output 12 V DC
• Output current: 1.5 A at 100% DC | 3.3 A max.
• Installation between FUHR switching power supply and multi-functional control unit

• Easy installation thanks to self-locking plug connections
• A green LED signals that the buffer is ready
• EMC-tested
• Compact design

• Takes over the 12 V DC supply once in event of a power cut to move the motor lock into a defined end position
• Use in commercial buildings, e.g. in fire protection doors or for retrofitting
• Perfect for installation in flat control cabinets and fuse boxes thanks to the compact design
• Input 12 V DC/output 12 V DC
• Output current: 1.5 A at 100% DC | 3.3 A max.

• Series connection between 12 V DC DIN rail mains adapter and DIN rail control unit
• A green LED signals that the buffer is ready
• EMC-tested
• For DIN rail width 35 mm according to EN 50022
• Dimensions: 89 x 53 x 59 mm

• The battery module ensures that motorised locks remain operational even in the event of a power failure
• Takes over the 12 V DC operating voltage without interruption if the 230 V mains voltage fails
• With integrated charge control
• Replaceable battery pack
• Ideal for use in the private and commercial sector
• Installation to the 12 V output of the FUHR switching power supply unit 

• Input voltage: min. 11.2 V DC, max. 13.5 V DC
• Output voltage: 12 V DC
• Uninterrupted switchover to battery operation
• Battery life with full battery: up to 15 h, incl. 100 actuations
• Easy installation thanks to self-locking plug connections
• Compact design
• CE marking

• For use with standard door hinges
• Profile-specific versions

• For use with covered door hinges and for pivot doors
• Profile-specific versions

• For use in intercom systems
• Transmits a radio signal for door opening when supplied with a voltage of 5-24 V AC or 6-32 V DC
• Secure encryption
• Pre-assembled connection cable

• For use with multitronic 881GL with follower release contact
• Connection between follower release contact and motor
• Pushing the panic handle activates the built-in transmitter which then sends a signal e.g. to the optional radio bell for acoustic handle monitoring
• Transmits a radio signal when supplied with a voltage of 5-24 V AC or 6-32 V DC
• Pre-assembled connection cable

• For controlling existing external drives, e.g. garage doors or sliding gate systems, with FUHR radio transmitters
• Can be controlled using radio key, radio fingerprint scanner, radio transponder, radio keypad, SmartConnect easy/door and Built-in transmitter for intercom systems

• Up to 10 FUHR radio transmitters can be configured 
• Creates a potential-free control pulse
• External power supply required: 
  12-24 V AC/DC

• 230 V switchable socket per radio transmitter
• Suitable for Schuko sockets
• Simply plug in between the socket and the device to be switched

• Can be controlled using radio key, radio fingerprint scanner, radio transponder, radio keypad, SmartConnect easy/door and built-in transmitter for intercom systems
• Up to 10 FUHR radio transmitters can be configured 

• For receiving the doorbell button signal from FUHR radio keypad, built-in transmitter for follower release contact, mounting transmitter for intercom system or SmartConnect door/easy
• For use with multitronic 881GL with follower release contact
• Can also be used for acoustic lever handle monitoring

• Can be used in combination with the built-in transmitter for intercom systems to upgrade existing doorbell systems
• Additional doorbell for use with SmartConnect door
• Up to 32 FUHR radio transmitters can be configured
• Designed for Schuko sockets

• For monitoring the leaf position of windows, doors or gates
• With magnetic bracket
• Transmitter module dimensions:
  65 x 12 x 28 mm
• Magnetic bracket dimensions:
  18 x 18 x 13 mm

• For door exterior
• For visual inspection or deterring potential burglars
• Pre-assembled with plug
• Can be connected directly on the motor drive
• The LED flashes red
  • as soon as the door has been closed and motorised locking is fully complete – for multitronic 881GL 
  • as soon as the door has been closed – for autotronic 834/834P/836/836P

• The LED flashes red when access control is deactivated via the control unit, e.g. due to an alarm system
• LED head dimensions: Ø 7 mm, height 3 mm
• Shaft dimensions: M6 x 0.75 mm, with washer and nut

• Chrome-plated brass
• Length: 500 mm

• Chrome-plated brass
• Opening angle: max. 120°
• Length: 370 mm

Cable sets for various requirements 

• Easy connection via plug & play
• Connecting cable with motor plug
• Connecting cable
• Extension cable

• For connecting the autosafe 837/837P in standalone mode or with an I/O module
• 4-core
• Length: 10 m